Finally, An STD To Prevent STDs! 

Playatech’s new Social Transmission Depot (STD) was born of Covid as a way to support socially transmitted goods, services, and connections without socially transmitted diseases (STDs). Because it never was about social distancing at all, just aerosol transfer reduction. 

Our STD turns 3 sheets of plywood into a sturdy 3’x6′ counter at convenient 36″ height, topped by a banner sign 9′ in the air to ensure visibility. That gives it a bit of wind load so consider staking in high-wind locations. 

With enough storage below the counter to camp there and sign posts strong enough to secure a plexi panel that takes peoples’ breath away, the STD is perfect for anything from advice booths to UN food programs. 

Playatech – The Best Treatment For Slotting Disease Is Make More Slots! 

[Show as slideshow]

The Dopest Way To Delight Your DJ! 

Ok, we hear you! For years, the Black Rock Bar has been the most popular DJ booth around, and it caused a bar shortage. Now Plitchenette DJ booths are causing a kitchen shortage, and we’re fed up with plywood abuse! So here is a dope-ass table designed to stop DJs from mis-using our food & beverage products…

Playatech’s new “DJ Dope” was optimized with DJ inputs from CA to NZ, and every DJ who’s tried it said “that’s dope!” so we know it’ll move you! It spins out of your hatchback to provide a work space over 5′ wide and 25″ deep at 40.75″ height, complete with cable guides, high rails to hide your jack junk, a lower shelf for cases, and wide side wings to keep drinks & dope away from the decks at 5AM. You can even modify the table height, or cut the top edge into a flame shape – all from exactly 2 sheets of plywood with no MOOP and no part larger than the 69″x28″ tabletop! 

If you really wanna get cool, add a cut-out design to the front panels and backlight it. Or tell us how to improve the design until there is nothing else a DJ could ask for. Except treats in the green room of course…

www.Playatech.com – Slots That Rock. And Rap. And Thump!

[Show as slideshow]

Our New Playavator Will Really Get You High…

It can be hard to get a rise out of anyone at Burning Man. We know; we’ve tried for 15 years and finally figured out how! We want you all to get a rise out of everyone, so we’re sharing. With a story of course. 

Prepping for Burning Man 2019, our friends at Crossroads asked if we could design ship-flat steps for performers to get up onto their 4’ high stage, and then from the stage up to elevated platforms. Having once enjoyed the thrill of performing live on the Crossroads stage as well as the scarier thrills of getting on and off alive, Sunshine said “of course we can do that”! 

So, he sat down with his sketchpad and the Playavator was born. Made from just one sheet of 3/4” plywood with no MOOP, it is the best way to get a rise out of anyone. Just slide it together anywhere, and get taller in 60 seconds.

The last time we tried to get people high on the Playa was a decade ago, when we designed Leave No Bleachers so you and 12 friends could get upwardly mobile and watch burns from premium seats. But it took six whole sheets of ply to get it up. Now, you can get yourself up and take a friend, for just one sheet! Who would have thought Playatech follows Moore’s Law?! 

Download the Playavator and make one today; it’s easy. Just be warned that we have never tested it for weight (nor even built one at all) so its capacity rating is “radically self-sufficient”. That means if you fall or get a splinter, it’s all on you – just like it is for the other 50 designs we’ve shared to get your camp up, down, moved, stored, and rockin’ it. 

Playatech – Helping You Get It Up For 15 Summers

Download PDF Here: https://playatech.com/wp-content/uploads/2019/07/PLAYAVATOR-REV.A.pdf

A Potting Bench, Kitchen, Workbench, Standing Desk, Or…?

You know you’re a Burner when: your wife wants a potting bench for Mother’s Day, and after seeing the long parts lists of online DIY options you design one from exactly 2 sheets of plywood cut into 8 parts – then as you make it, you realize it will be a great playa kitchen! Or workbench. Or standing desk.

Whatever it is, we think it will make your day! And, like every design we share, building one for BRC leaves invisible extra parts inside you: Larry’s 10 Principles, that will always live on.

The Plitchenette offers a 60″ x 30″ work surface at convenient counter height, plus two lower shelves and an upper one. Also included in the plans is a suggested sink cut-out location, enabling you to add all the features of our iSink or Dish Delight designs to provide a fully-equipped camp kitchen – see those pages for links to water gear. Then, just add a camp stove on the counter, ice chest under its shade, and coffeemaker up top to become a playa master chef! We tried to make those from wood too, but not everything we try works.

For potting bench use, you can make the sink hole without installing a sink basin, place several open bins on the shelf below the counter, and slide any bin into place below the sink hole to collect soil, gravel, sand, or other materials spilled on the counter.

Whatever you do with it, please send a picture. Whoever sends a pic of the most ridiculous application will receive their choice of plans for any 3 designs you like. With thanks to Wristy for endlessly turning Sunshine’s chaotic graph paper sketches into plans you can use…and to Larry for turning us all into artists…

Playatech – Don’t Leave For Home Without It

 

 

[Show as slideshow]

Preview Plans For This Item Below:

[Show as slideshow]

The Ultimate Dishwashing System For Large Camps and Gatherings

While designing our breakthrough iSink Water Ritual System, we faced a conundrum: it would be perfect for washing hands, but rather small for washing dishes! And if there is one thing we don’t need at festivals besides skanky hands, it is skanky dishes. So we designed a different water system specifically for dishes – LOTS of dishes! As in your camp of 100+. Here’s how we did it…

Besides needing a larger sink basin that can fit big platters and cookware, we also considered process design for cleaning dishes versus hands – water is scarce in the desert, so anyone with a lot of dishes can use water efficiently through a 4-step cleaning process using four bins (thanks to Jazzi for pioneering this approach at Red Lightning): 

1) Scrape all food wastes off plates/cookware into a waste bin. Perhaps wipe eatery items down with a recycled napkin and throw that in the waste bin too, to enable the water used in remaining steps to go MUCH farther. The waste can go to compost…

2) Scrub the eatery item in a basin filled with soapy water.

3) Rinse the eatery item in a basin filled with clean fresh water. 

4) Sanitize the eatery item in a basin containing a weak diluted bleach solution. 

So, we began with the notion of 3 iSinks in a row, with larger sink basins for #2-4 and an extra bucket at the start to handle #1. How much larger? A 5 gallon sink basin is not much larger than a 2 or 3 gallon basin as used in the iSink, so we settled on 10-gallon Roughneck bins because they are strong enough to pick up and move to a gray water disposal area, even half filled. 

Holding up 3 ten-gallon bins filled with liquid & dishes plus another 3 five-gallon supply bottles above them turned into a giant contraption weighing hundreds of pounds and requiring at least 2 sheets of plywood. So, we copped out and and designed a 1-sheet table-top solution intended to sit on a typical 6’ long folding table. The food waste bin even has its own cute floor stand! 

The key to Dish Delight is that for dishes, we do not need water faucets with a constant flow function like hand washing requires, so you can buy the lowest-cost faucet valves for screw-top or crown-top 5-gallon bottles, and we can hold the bottles at an appropriate angle using a slotted plywood device designed like a wine rack for big fat 5-gallon bottles. 

Logistically, you might only use 2.5 gallons in each 10-gallon sink basin, so each 5-gallon supply bottle may fill its wash basin twice if that. Therefore, you’ll want a way to quickly refill water bottles from your camp water supply and then load them onto the Dish Delight, such as a small transfer pump at the supply side. Similarly, each Homer Bucket drain capacity is only one 5-gallon water supply bottle and only half the max capacity of its sink basin, so you’ll want an efficient way to dump the sink basins before refilling – the 10-gallon basins we chose come with covers, so we think you can carry them to a gray water disposal tank and use a sump pump there, skipping the Homer Buckets entirely (sorry Homer). We do recommend you label your water supplies and roughneck bins “soap”, “rinse”, and “bleach” to avoid mixing them up. 

Now you know how we designed Playatech’s new Dish Delight – the ultimate dishwashing system for larger camps and temporary kitchens. Just put one near your iSink Water Ritual System for hand washing, and your playa soup line is ready for action. We think. Like everything Playatech and indeed everything about Burning Man itself, this is an experiment…

Playatech – Testing Half-Baked Products On Unsuspecting Burners Since A Decade Before That Musk Guy

To Keep The Health Cops Away, Build an iSink Today!

Ever wondered why everyone you meet at Burning Man hugs you instead of shaking hands? You THOUGHT it was our ecstatically friendly culture, but it is subconscious survival instinct: your hands are SKANKY! And the health department knows it – their rules even show a hand-washing station as the most important element in any temporary public food or drink establishment. 

Playatech eliminated skanky playa couches way back in the year of The Psyche, and to celebrate Radical Ritual we will eliminate skanky hands in all of yours, by finally making humanity’s most ancient water ritual “easy anywhere”!

Behold – the iSink hand washing station, featuring the three key components of civilized plumbing with all their chakras in proper vertical alignment: controllable water source, sink basin, and drainage. Crude looking, but functionally elegant in true Playatech style, and guaranteed to keep the health department away when used as directed (or return the parts for a full refund:) 

The iSink is a modular system that functions with any type of 5-gallon water dispenser – to achieve health-cop hand-wash nirvana, make sure yours includes a “constant flow” valve that stays on while both hands are in the water stream, like this or this. And use soap! 

For the sink basin, a typical 12 quart dishpan will do, or an 16 quart for splashy folk, or get fancy using a camping sink with working drain – whichever way you go, you can remove our sink basin for remote water rituals from foot washes to hair tinting – just try THAT with your fancy RV sink! And of course for drainage, we used the classic “Homer Bucket” – let’s do this! Figuring out where to pour THAT is up to you (hints: be self sufficient, and leave no trace!). Links to order various water gadgets are highlighted above, or find/make your own. 

But wait, there’s more! Connecting with people to make Playatech and share it at Burning Man is a process meticulously designed to engage you in all 10 Burning Man Principles – yes, we are a Burner factory, not a furniture company! To celebrate that, the wizards of Playatech squeezed two iSinks onto one sheet of 3/4” plywood, so you can make 2 and gift 1 – please pay forward the gift of good health to the planet. Or at least the next camp over. 

Ok, hurry up and build the iSinks today, so I won’t catch something nasty from your skanky hands tomorrow! But please don’t stop hugging your favorite Playatech Hottie just because your hands are clean…Sunshine’s favorite Playatech hottie today is newbie Tyler Baumgardner for putting the iSink in CAD. Maybe his playa name is destined to become “Water”; we’ll see…

Also available NOW: the radically novel Dish Delight, a crack 4-step dishwashing system for larger camps – integrating scrape, soap, rinse, and bleach stations the size of the deep playa….only from: 

Playatech – BRC’s Fake Corporate Monster Relentlessly Eating Playa Problems

The Man Asked For A Confessional, and Got A Home For Radical Ritual

In the Dark Ages (Burning Man 2005), we instigated a Renaissance in seating that eliminated skanky couches from festivals. Then our ultra-secret ZaVinci Labs alchemized bars, bike racks, and stages into radically efficient art. Now, we take our slotted structural Renaissance to the next level by sharing the secrets of the Burning Booth – a modular construction system for rapidly deploying small structures used in radical rituals or habitation.

In true Renaissance form, we first built a church for Burning Man 2016. Well, it looks like a little church, in the Mission Style that will not be re-invented for 300 years. Commissioned by the information dissemination office of the high government of Black Rock City, all of the high priests and priestesses of the Burning World were commanded to perform a radical ritual: confess in this little church to a video camera at the 2016 Global Leadership Conference.

To fairly honor this high purpose, the “Burning Booth” is the first Playatech design that has ever contained the highly guarded and globally feared word “Burning” (with a capital B); a word that has crushed the titans of industry. You can see how easy this church is to assemble here, and we share its construction plans with the world for a mere donation of $20 to the art gods that will enable little churches everywhere. It integrates a bench on one side and an altar on the other, but you can change either or both easily into whatever your ritual requires.

Yet the Burning Booth is but a Trojan Horse, destined to unleash full structural enlightenment upon the masses. It heralds a new era in construction techniques that can enable even the poorest peasants of the land to build a structure for radical ritual or own a home. A strong, safe, solid home that muskets cannot penetrate.  A home constructed in the magical time of one hour, at the magical cost of just one silver dollar per square foot (about $20 US).

Until then, the Burning Booth is:

• – 18 cubic feet of wood, alchemized into this 3D puzzle in minutes with nary a fastener
• – A magic box that can change to a photo booth, DJ booth, projection booth, or chapel in moments
• – A modular system enabling furnishings, fixtures, windows with counters, or anything you need
• – A fun playa-scale construction kit for grown-up kids: design your own parts to dial in your details
• – Proof of concept for a 110 sq ft Playatech nano-home built in one hour for $1k – furnished
• – A creation of Playanardo ZaVinci, sculpted by Sunshine & Wristy of ZaVinci Labs

We hope the masses will come in from the cold and dust, and make a memorable ritual in this box…

To preview the assembly instructions before ordering, click here.

Playatech – The Only Brand The Man Can Stand, And No One Else Crazy Enough To Try

[Show as slideshow]

Preview Plans For This Item Below:

[Show as slideshow]

Even Cheaper Than China!

It’s time for us all to simplify, cut costs, get spiritual, and focus on the important things: like a soft place to land right now that doesn’t cost a pretty penny. So for these depressed times, we’ve cut the fat to the bone, and gone way beyond the shirts off our backs – we’ve taken the backs off our stacks! Of plywood that is.

That’s it – all you really need to sit in style is back support, and maybe something soft between your bones and the dirt. So, the economy broke our asses but not our backs! In our new BlackJack floor seating series, you sit on a tarp clipped to the BlackJack (or fluffy fur if you prefer) and your weight prevents the back support from moving – or skip the tarp for high-friction surfaces like lawns. And you have two design choices for each sheet of ply!

• With our VIP Model, one sheet can make two 4′ wide Blackjacks that seat up to 4 people each (6 if you snuggle), including integrated side tables for eating and drinking.
• Or, skip the side tables for our Economy version – one sheet of ply makes a giant 8′ Blackjack that seats at least 8, AND two 4′ Blackjacks that seat at least 4 each. That’s 16 purrfect parking spaces for your purty parts, with room to fit another 8 close friends.

The VIP is cush enough for movers and shakers. The Economy brings the state of the art in slicing and slotting efficiency, and a new generation of price/performance: a one sheet Playatech party lounge that seats 2 per slot and doesn’t leave a trace! Just perfect for spiritual workshops, dusty picnics, raver parking, and reclaiming that dumb space around the perimeter of your dome.

Make some now while there is still time! Because in the metropolis of the future, Playatech can’t save your ass, but we can sure prop up your spirit. Even if we can’t afford pretty CAD drawings these days…

Playatech – Bringing Any Metropolis Down To Earth

Check out more images for this product:

[Show as slideshow]

Preview Plans For This Item Below:

[Show as slideshow]

To Build a City, We Need a Place To Work!

In Black Rock City, we’ve seen people soldering, welding, gluing, emailing, and doing otherwise normal work in the strangest places and positions. That’s because no one has a desk or a workbench! Why not? Because no one ever figured out how to build their own from a single sheet of plywood until 1972! And news travels slow sometimes. Read more

What Could Be Simpler??!!

This one just made us go “Duh”! Two years after starting Playatech and thinking we invented slotted plywood seating, we find a 1972 book called Nomadic Furniture that includes this chair design – and it assembles from just four pieces, two less than our Playa Love Seat!

Of course, it only seats one instead of three, needs 3/4″ plywood, and doesn’t use exactly one sheet, but it does the job and looks pretty classic.

When we figure out how to lay out three Simple Seats on two sheets of ply, we’ll let you know – and we might call that one Ultra Seat. Until then, it is just a simple bare necessity you can build from the original circa 1970 plans.

Playatech – So Advanced, It’s Simple

Check out more images for this product:

[Show as slideshow]

Preview Plans For This Item Below:

[Show as slideshow]

Furr All Your Fancy Fashions

Our friends spend their entire year making amazing playawear and lug it hundreds of miles just to wear it for a week. Within minutes of arriving Home it’s all in a dusty pile on the floor of their tents – that’s just not right!!!

So we fixed it. Our unique new Ploset playa closet organizer ends that mess forever!

Just 5’ tall to fit inside most tents, the Ploset holds enough hanging clothes for a week of playa nights, and we know you don’t wear diddly in the daytime. It features not one but two built in shelves for folded and piled stuff, and a special area to hang belts, fluffies, camelbacks and other accessories! Your playa boots stash underneath the lower shelf, and best of all, it matches perfectly with the Larry Boy Lounger you’ll be sleeping in.

Professional closet organizing consultants might charge hundreds of dollars to custom design a closet organizer this functional for your tent. But not Playatech – in return for saving you precious hours of playa time digging for that lost lingerie, we just want the price of a burrito sent to the arts. Pay it forward, and art we can’t imagine yet will always fill the closet of your psyche with wonder.

You can make a Ploset yourself in 30 minutes from one sheet of cheap ½” ply, one 4’-6’ closet bar or pipe, and some nails (or screw hooks if you’re fancy) – plans are posted on our order page. The Ploset collapses instantly to ship in 1.2 cubic feet not counting the pipe, burns when you’re sick of it, and of course, you absolutely should turn it into an art project any way you like. Plosets also make perfect coat racks for your camp’s dome or bar.

Playatech staff reserves the right to detect Plosets using infrared sensors stolen from BLM, to enter tents for purposes of Ploset quality inspection, and to request personal favors from Ploset owners whose art royalties are in arrears.

Playatech – Raising the Bar On Black Rock Lifestyles

Check out more images for this product:

[Show as slideshow]

Preview Plans For This Item Below:

[Show as slideshow]

Just A Couple Little Tables

We threw a couple of these together to go between a pair of Desert Daze Beds, and then thought “what the heck, since it is so easy to add products to the web site now, let’s call this a product”.

You can get three out of one sheet of ply, and we’ll get pix up soon. But we need to bang on html bugs to go live, so this is all we have for the page right now 🙂

Playatech – Fastest Furniture of the Future

Check out more images for this product:

[Show as slideshow]

Preview Plans For This Item Below:

[Show as slideshow]

A Pantry On The Playa

Our VP of Technology and CADmeister Wristy wanted to raise his cooler off the ground and stash some chips, so he took our 2005 Ploset design and converted it from closet to kitchen!

The Plantry keeps your cooler cooler, with a built in hole for dumping water (into a pan; he’d never dump grey water on the playa). It also contains not one, but TWO shelves for your canned goods and other non-perishable food. That’s enough space for a whole week on the playa, assuming you stash the booze somewhere else. All from exactly one sheet of ply, as is the Playatech way.

Good going Wristy! We’re all coming over for dinner…

Playatech – Eat Your Heart Out IKEA

[Show as slideshow]

Stop Sleeping in the Dirt!

Are you still attracting dirt and bugs into your bed instead of dates by camping on the cold, hard ground? Stop living like a scorpion and start sleeping like whoever owns this town! With the Bedevator, it’s as easy as slicing wood.

he queen size Bedevator lifts your bed 10” off the ground and contains insulating air compartments underneath it for a warm sleep. It’s easy to store shoes or gear bins under each edge. And it even includes built in Nightstands! All for the price of 2 sheets of ply.

To truly live like royalty, the Bedevator King lifts your bed 12” off the ground, also includes Nightstands, and even includes the world’s first Playa Safe! The Playa Safe securely holds nearly 2 cubic feet of worldly possessions under lock and key so you can leave your tent in peace. The entire Bedevator King requires just three sheets of ply, and securing the safe requires an additional six “L” brackets, a hinge, a hasp and a lock.

Desert sleeping doesn’t get any better than this. Well, not unless you build a Desert Daze Bed or a Larry Boy Lounger! Air mattress or foam pad not included. Playatech will not be responsible for loss or theft of your stuff or your safe key.

A little reminiscing: when Sunshine graduated college in the early 80s, he couldn’t afford a bed. So his boss helped him build one like the Bedevator, sans Nightstands. It is still well used in his guest room, and its slotted design served as the inspiration for the Playa Love Seat in 2005. Wonder if his boss read “Nomadic Furniture”? What goes around…

Playatech – We Do It the Old Fashioned Way

Preview Plans For This Item Below:

[Show as slideshow]

Impress Her When You Undress Her!

We know guys just throw their clothes all over the place, but girls like to keep their clothes neat and clean and wrinkle-free. So do your honey a favor, and put her clothes away for her! She’ll love it, and you’ll love the thank you.

The Presser is made from two sheets of ply, and designed to hold plastic bins as drawers – feel free to adjust the shelf heights to fit your drawers. If you have a problem pulling drawers out too far, add a peg at the bottom front of each shelf as a drawer stop. Of course why anyone would want to stop pulling drawers off is beyond us…

Playatech – Undressing Is Art Too

[Show as slideshow]

Where To Put All That Swag

The Gear Gizmo offers a simple shelving system for storing and organizing all the stuff littering your camp. The first person to send us a picture of one covered with playa swag wins a prize! We don’t know what the prize is yet though, and if you have that much swag we might just donate the prize to Goodwill since you don’t need it.

Playatech – Simple Solutions For All Your Playa Problems

[Show as slideshow]

It’s Not All Fun and Games

Sometimes we need to get spiritual even in the midst of the greatest party on earth. Usually that means hands and knees on the playa, but not anymore! Now you can stand up to crystals, buddha, or whatever your crown chakra desires, because Playatech has created an altar.

Not just any altar – a two-level wedding cake style altar table in the round, so everyone can worship in a different direction. Just our style, something for every religion and then some.

We’ll get around to posting plans for it sometime, but until then, visit Silicon Village and pray you find the Altar so you can learn the secrets of Mt. Olympus.

To preview plans, click on the plan images. To donate and download full plans, use “add to cart” for the full Playatech experience.

Check out more images for this product:

[Show as slideshow]

Playatech – Someday Everything Will Be Plywood

Preview Plans For This Item Below:

[Show as slideshow]

Introducing Our New Division, Coffintech

Yes, the friendly Goth vampires at the Blood Vessel project asked us to create a coffin. They plan to collect notes to the departed that get folded up into origami cranes, and burned in the coffin at the Temple on Sunday at BM07. We almost died laughing, and then we said “why not?!”

Think about it – when you get buried, everything rots but the screws holding the coffin together. How eco-unconcious can you get! You messed up the planet by living here, so the least you can do is leave no trace when you’re dead. Now it’s easy, with the Goffin!

We think coffins that don’t screw you are so cool we might start a new division to mass produce them. We don’t mind if our customers are dead, since no one pays us anyway! So why not build one today, just in case? It will make a great conversation piece for now, and once you need it, you won’t have time to play with power tools.

Check out more images for this product:

[Show as slideshow]

Playatech Has Something For Every Body: Even Yours

As Ordained By Her Excellency: The Rack that Saves Your Back

Our friend Dragi originally built this cool Playatech style bike rack for his BM05 camp, and all we got was a picture featuring our very own VP of Branding and Chief Hottie, Glimmer.

We figured you could make one without plans, and even if not, Glimmer’s worth her own web page.

But then for the American Dream in 2008, the Honorable Harley K. Dubois, Commissioner of the Kingdom, sent word to Playatech that the Kingdom had need of a bike rack design to be ordained for use by all of the Noblepersons’s palaces. And thus, Playatech endeavored to improve upon the initial design, resulting in a set of plans formally delivered to Her Excellency, and contained upon this site. In service of the King, Her Excellency’s bike jack is the best rack in the Kingdom, and consumes exactly one sheet of precious wood.

The plywood revolution has begun – what has your palace done to obsolete IKEA lately?

Check out more images for this product:

Playatech – We don’t make your camp; we just make it collapse.

Preview Plans For This Item Below:

[Show as slideshow]

Playatech Turns Another Camp Headache Into Art!

Our lovely friend and supporter Dilicious created this really cool can crusher for our camp using Playatech assembly methods. We’re hoping she’ll see this and send us the plans, but in the meantime, here are some pix and figure it out yourself.

Just another Playatech way to leave no trace of your camp…for everything else, have you seen our lighters??!!

Check out more images for this product:

[Show as slideshow]

Playatech – We don’t make your camp; we just make it disappear…

The World’s Most Puzzling Shade Structure

Playatech’s secret labs have combined our radical slotted plywood technology with the age-old Lincoln Log construction approach. No kidding!

We’re now offering a real purty peaked roof Plazebo made from 100% plywood and assembled like a giant 3D puzzle, using no fasteners. You might have seen a couple at a major playa installation in The Future. Destructive testing was spectacularly completed 9/3/06 on the biggest burn platform in Black Rock City…

If we can make them large enough, we’re taking on the portable garage industry! Until then, they make great homeless shelters.

Check out more images for this product:

[Show as slideshow]

Playatech – We Have A Way With Slots

Preview Plans For This Item Below:

[Show as slideshow]

The World’s first bleachers that seat no spectators, and leave no trace

Playatech’s secret R&D labs have developed a collapsible plywood bleacher module that lifts 12 or more burners above the crowd. This unique system lifts burners more compactly than an art car with less obtrusive crap blocking others, it can’t run you over, it is made from sustainable resources, and it only costs about $10 per user!

Before the burn, place it in front of your camp with a “Spectators” sign and watch as they gather to jeer at participants. Then set it up on the playa to watch the big burns!

After Man fall, each Leave No Bleachers module may be placed in front of the fire and flipped into the embers to feed the flames. This ensures those in the bleachers are the only members of the audience that AREN’T spectators. How cool is that?!! Alternatively, Leave No Bleachers may be reused by installing them post-event at the Gerlach baseball stadium.

Just another radical peek into the future, from Playatech. Someday, everything will be plywood…

Check out more images for this product:

[Show as slideshow]

Playatech – We don’t make your camp; we just make it collapse.

Preview Plans For This Item Below:

[Show as slideshow]

The World’s Only Wooden Playawear!

Playatech is proud to offer the world’s first wooden trashion for playa hotties.

At BMO5, our Playakini debut stopped traffic all over Black Rock City, and the resulting chorus of “nice coconuts” could be heard all the way in Gerlach. But these aren’t coconuts; they are wood knockers! Now you know where they got the old saw about knocking on wood for a happy future…

The Playakini and our other wooden trashion products are available in any size from DD to FU, by special order only. That means we ain’t got no plans to share. Ever heard of a French clothing designer sharing its plans? We didn’t think so!

Check out more images for this product:

[Show as slideshow]

Playatech – Someday Everything Will Be Plywood

The Ultimate Connector

Are you kidding??!!! If you want a screw, look under your RV! Playatech is known worldwide for its innovative approach to furniture design that requires no screws or other fasteners. But we love software! So here are some images of Playa Screws – the ultimate connector. If you’d like to know how to make a Playa Screw yourself, ask someone real nicely:)

Check out more images for this product:

[Show as slideshow]

Get Met On Playatech…

Dust Off And Get Your Act Together!

After years of building seating, beds, storage, bars, and lots of strange things to burn, we decided to put on a show. For kids, which precluded dancing on our bars. So we needed a stage! Here is an easy peasy one…

The Simple Stage is a 4’x8′ stage surface made from one sheet of 3/4″ plywood painted flat black (or stage black if you’re rich). The support structure is made from exactly one more sheet of 4×8 ply for a 1′ high Simple Stage, or use our bonus Easy Riser design to make your Simple Stage 2′ high using two sheets for the support structure.

Either way, each Simple Stage may be used by itself, or as a modular part of a larger stage – just make some little connectors with two slots, and make slots in the outboard support risers to connect Simple Stages any way you want.

Simple Stages and Easy Risers ship flat & palletized as a 4×8 stack. At just 4 cubic feet and ~100lbs per module (for 1′ tall), they offer a perfect solution for any rapidly deployable performance situation.

Check out more images for this product:

[Show as slideshow]

Playatech – When You Hear Us Knockin’, It’s Time For Rockin’

Preview Plans For This Item Below:

[Show as slideshow]

Special Order For The Almighty’s Empathy Oasis!

In 2012 we got a special order for a very special purpose: to raise up the throne in God’s Empathy Oasis – where God answers calls from a Talk To God Phone in a remote phone booth, to anonymously provide mere mortals with purpose and direction.

We had to create something special of course!

So we made this 12′ diameter octagonal stage, from 7.5 sheets of ply. On this we raised the throne, and God held court there with some angels, and God said, “let there be Burning Man”. And so it was…

The plans aren’t too polished for this one, but you ought to get the idea if you’ve made Playatech before. Just use some simple hardware to secure the stage surface to the support structure, or you might fall from God’s graces …

Check out more images for this product:

[Show as slideshow]

Playatech – Yes, There Really Is A Stairway To Heaven

Preview Plans For This Item Below:

[Show as slideshow]

For our UniFire extravaganza at BM13, we needed a 24’x12’ fire performance stage. We could have made a bunch of Simple Stage modules and slotted them together, but we wanted to make an enlarged OctoStage with angled corners instead. Why? Cause it seemed cooler!

The OctoStage design appeared too complex to extend, so Sunshine radically simplified things into a modular repeating pattern that could extend to any size stage. Then complicated things again by adding a rear step for performers and a space under the front for a subwoofer.

The result became the MegaStage. It can easily be made 1’, 2’, or 4’ high – we chose 2’ to limit wood costs. It took a bunch of folks a day to fabricate but on-playa, it slid together in about 1.5 hours with 3 people – numbering every part helped. Except for a few warped areas, we skipped installing the planned “L” brackets at the ends of the support boards because they weren’t needed. We screwed the stage surface to the supports in a few places, and voila! A MegaStage that can take hard wear, using hardly any hardware – for less money than renting a conventional stage.

The fire performers rocked it BTW…

Check out more images for this product:

[Show as slideshow]

Playatech – Turning Industrial Art Into Performance Art One Fire At A Time

Preview Plans For This Item Below:

[Show as slideshow]